Manufacturer supply glass manual drilling machine Application
This machine is used to drill holes on flat glass. The hole size can be 220mm.
1. For flat glass
2. with two drills
3. glass thickness:3-30mm
4. the rigid and anti-corrosive spindle enables maintenance free.
Glass prinple introduction:
1. Two drilling spindles, one at the lower side and another upper. When the glass is put on the table, it is fixed pneumatically and the lower spindle will rise up automatically to drill from the bottom side if the glass. Then the upper spindle will drill the top side of the glass and thus, the hole is drilled through.
2. The cooling water runs inside the core drill so that the cooling effect is directly acted onto the glass without any loss.
3. Tapping or chamfering can be made on the hole for particularly purpose.
Main Technical Specification:
1. For flat glass
2. with two drills
3. glass thickness:3-30mm
4. the rigid and anti-corrosive spindle enables maintenance free.
Glass prinple introduction:
1. Two drilling spindles, one at the lower side and another upper. When the glass is put on the table, it is fixed pneumatically and the lower spindle will rise up automatically to drill from the bottom side if the glass. Then the upper spindle will drill the top side of the glass and thus, the hole is drilled through.
2. The cooling water runs inside the core drill so that the cooling effect is directly acted onto the glass without any loss.
3. Tapping or chamfering can be made on the hole for particularly purpose.
Main Technical Specification:
Model Number | YD-HD-5/80 |
Distance from hole centre to C-stand (mm) | 1250 |
Hole diameter(mm) | 4~220 |
Glass thickness(mm) | 3~30 |
Upper and lower drill concentraicity | <0.1mm |
Working speed adjusting | 6 steps |
Verical degree of the hole and glass | <0.2mm/300mm |
Power (kw) | 3 |
Outer dimention (m) | 2.2 x 2 x 1.6 |
Weight (kg) | 850 |
Advantages of the machine
1. The machine has 3 working mode: manual, aumatic and continous drilling
2. Eacy operation control panel
3. 6 steps speed adjusting, to suitable for different size hole driling
4. With a foot steper for big size glass drilling
Warrtanty: one year
Guarantee And After-sale Service
One year guarantee for whole machine.
24 hours technical support by e-mail.
Easy operation, provide user manual and detailed Videos/CD.
We will provide all spare parts needed for maintenance of the equipment.
Certification: CE