Set up a new account on the XDA Developer Forum
Log in to the XDA Developer Forum
Add swipe gestures to any Android without root
Make your phone easier with one hand, no root required
The best way to access XDA on your phone
A sweet, feature-rich launcher with beautiful UX.
XDA's official trading technology market
It is becoming more and more difficult to build a unique looking PC and distinguish your build from other builds. This is due to the large number of PC cases available on the market. We have managed to pick some of the best and unique cabinets for our best PC case series, but to stand out from the crowd, you can only do a lot. Of course, buying a custom shell is always an option, but it is an expensive solution. One way to ensure that your build is different from other builds is to choose different colors. In this article, we will look at some of the best pink PC cases you can buy right now.
Seriously, the pink PC case is unique. There are not too many pink PC cases on the market, which is why you don’t see them often. We managed to sort through hundreds of pages on the Internet and found the best pink PC case for this series. You may not find pink PC cases from your favorite mainstream case manufacturers such as NZXT or Corsair, but these are some reliable cases with excellent features such as spacious cases, good radiator support, a large number of Expansion slots and so on. So don't waste any more time, let's start with our list of the best pink PC cases that can be purchased in 2021.
Vetroo A03 is a mid-tower ATX gaming PC case, available in pink, black and white. This PC case looks very similar to the Corsair 4000D Airflow PC case, but it is cheaper than the Corsair case. As you can see, the Vetoo A03 case is equipped with tempered glass side panels that allow you to see the built internal structure. It uses ordinary panels on the remaining sides and has ventilation holes for airflow. There is a mesh panel on the front of the enclosure to provide maximum airflow. There is space in the front to install three 120mm chassis fans to help drain hot air out of the system.
Vetroo A03 has what we call airflow design. Many PC cases tend to use a tempered glass panel on the front, with small vents for airflow. The mesh design has been proven to provide better airflow, which is why many chassis manufacturers are now releasing airflow variants of older chassis. This special case also comes with a dust filter installed for the front panel. This is essential for airflow enclosures with a large number of vents to prevent dust from entering the enclosure.
The big advantage of this PC case is that it comes with three 120mm ARGB/PWM fans pre-installed. You can also get a controller to control the pre-installed chassis fan, which is great. In addition to the three pre-installed chassis fans, there is room on the top panel to add up to two 120mm or 140mm fans, as well as 120mm fans on the rear panel. However, you must purchase these fans separately, as there are only three in this case. Vetroo A03 also provides a pretty good radiator installation option. You can install a 360 mm or 240 mm radiator on the front and a 240 mm radiator on the top. Even with ATX motherboards, there are enough radiators inside the case to install these radiators, which is great.
There is a separate compartment at the bottom to hold the PSU and HDD. Thanks to the dedicated installation space behind the motherboard, you can also install more drives. You can get many cable management functions, but the Vetroo A03 is equipped with two wire combs installed behind the motherboard tray for wiring. There is also a very good port selection on the front-end IO. It includes a USB 3.0, several USB 2.0 ports, audio jack and power/reset button. In addition to the two vertical slots for separate GPU installations, this chassis is also equipped with seven expansion slots.
All things considered, Vetoo A03 is an excellent PC case, equipped with all the essentials. There is enough space inside the case to even build a water-cooled PC with a water tank. You can get all of this for only $90, which is an amazing deal. Many mainstream PC cases with similar feature sets on the market will bring you more benefits. You can click on the link below to purchase this case from Amazon.
If you are looking for something that looks more eye-catching, then we recommend that you check out the Apevia Crusader-F-PK PC case. As you can see, this mid-tower gaming PC case has a unique front panel. It is essentially a combination of grid and solid panels. Its side is equipped with a transparent tempered glass panel. The side panels can be easily removed because they are connected with thumbscrews. The top panel of the housing also has ventilation holes and is covered with a mesh filter. This special case is also available in pink, black and white.
The Apevia Crusader-F-PK case has enough space to install a bunch of case fans. You can install three 120mm fans on the front and two 120mm fans on the top panel. There is still room to add a 120mm fan at the back. The good news is that this case comes pre-installed with four 120mm fans-three on the front and one on the back. This means that Apevia Crusader-F-PK is ready to use out of the box, without costing you more on the chassis fan. As for the radiator installation options, you can install a 360 or 240mm radiator on the front, or a 240mm radiator on the top panel.
This special PC case supports ATX, mATX and ITX motherboards, leaving more space for the heat sink. It also provides you with enough space to install a GPU with a maximum length of 350 mm. There is no vertical expansion slot, but there are seven PCI expansion slots, enough to install more than one GPU. There is also a separate compartment for installing the PSU at the bottom, allowing more space to add HDDs. Apevia Crusader-F-PK is also equipped with dedicated drive brackets for SSD and HDD. It is worth noting that you can also install a CPU cooler with a maximum height of 165 mm.
It is also worth pointing out that the motherboard tray has cutouts for routing cables to the back. This will help you properly manage the internal cables to build a clean-looking PC with minimal cable clutter. The Apevia Crusader-F-PK PC case has many things to like, it also has a pink color. The front panel has a striking design with a bit sharp edges, but it boils down to personal preference. We think black will look better in this case, but pink is also an option, and you can't go wrong.
At $75, this is one of the best pink PC cases we can find on Amazon right now. You can also upgrade to Vetroo A03 by spending a little more money, but they are equally good. We’ve also added more suggestions for this series, so be sure to look around until you find a suggestion that meets your requirements. You can click on the link below to immediately find the best price for the Apevia Crusader-F-PK protective sleeve on Amazon.
If you tend to buy a cheap PC, then you may want to consider buying an Apevia ENZO-PK PC case. This particular unit costs only $67, making it one of the most affordable PC cases in the series. Pink happens to be the most expensive, at $67, while the black and white version is only $60. Despite the affordable price, we think there are still many things to like about the Apevia ENZO-PK case.
First, it uses high-quality metal structure and transparent tempered glass side panels. Many cheap PC cases often lack transparent side panels, so this is a welcome addition. There are vent holes on the side of the front panel to facilitate air circulation. There seem to be 5 different vent cuts on the front of the ENZO, which is very good for a case with a normal front panel. The top panel also has ventilation holes to provide better airflow. It is worth noting that the top panel vent is covered with a mesh filter to prevent dirt and dust particles from entering the housing.
The Apevia ENZO-PK PC case provides a lot of space to add case fans and heat sinks. There is room for three 120mm fans in the front and two 120mm fans on the top to take advantage of the ventilation holes there. There is still room to add a 120mm fan on the rear panel to suck in fresh air. It is not common to provide so many installation options for cheap PC cases, so we are very grateful for this option. Having said that, in this case you can only pre-install one fan, and the rest must be purchased. This may increase the total cost of the build, but we recommend that you buy at least two more fans to get good airflow.
If you want to use AIO liquid CPU cooler, you can also install a heat sink in the case. There is room to add a 360/240 mm radiator at the front and a 240 mm radiator at the top. The space of the heat sink also depends on the size of the motherboard, so before picking up all the heat sinks, please make sure that you have enough space to place them to avoid gap issues such as RAM modules. Apevia did not mention anything about the length of the GPU. The CPU cooler height clearance of the chassis, but we assume that you can install any new GPU and most CPU coolers without major problems.
Apevia ENZO-PK provides a separate compartment for installing the PSU at the bottom. You can also add HDDs here or install them separately on dedicated drive brackets. There is also enough space behind the main motherboard tray for cable management, although there is no cable management function. Front-end IO includes some good port selections, but they are nothing special. Overall, we really like the Apevia ENZO-PK PC case. The best thing about this particular situation must be its affordable price tag. It's not the best quality pink PC case you can find on the market, but it's great value for money.
Golden Field Mage-P is similar to our previous Vetroo A03 in this series. This is also an airflow box with a mesh front panel to provide maximum airflow. The front mesh panel of the Golden Field Mage is similar to the Fractal Design Meshify 2 PC case. This is not the exact same design, but it is similar to that case, and it will remind you of this more than any other case. For the side panels, we are studying tempered glass so that you can see the inside of the build. There are also pink, black and white options for this particular case, but we think the pink one looks the best.
There are ventilation holes on the top panel to allow more airflow. The top vent is also covered with a dust filter to prevent dirt and dust particles from entering the chassis. We believe that it is necessary to install some kind of filter for the vent to keep the internal components healthy. It also makes the entire cleaning process easier. Three case fans with RGB lights are pre-installed on the front of the Golden Filed Mage-P PC case. In addition, you can install two more 120mm fans on the top panel and a 120m fan on the back.
There is also room to install two additional 120mm fans on the top of the PSU compartment to maintain airflow in the PSU and drive spaces. For PC cases that cost as high as this, this is not common, so we also appreciate it. This special PC case is also great in terms of heat sink support. You can easily install a 360mm or 240mm radiator on the front and a 240mm radiator on the top panel. This allows the Golden Filed Mage-P PC case to be used for water cooling. You can use ATX, M-ATX or ITX motherboards for this PC case. We also like to add cable routing cutouts on the motherboard tray.
It is relatively easy to use this case, because both side panels are easy to fall off. There is enough space inside the case to easily install all the components, which is also great. There is still a lot of space to install different SSDs and HDDs. We think you will never run out of space to install them. You can also get seven expansion slots to install the largest GPU on the market. You can install a GPU with a maximum length of 320 mm and a CPU cooler with a maximum height of 165 mm in this PC case.
In general, we really like the Golden Field Mage-P PC case. If you are looking for an airflow case for your build, this is a great choice. We recommend choosing the airflow PC case on the ordinary PC case because it can easily adjust the heat output of the components. Compared with a closed panel, you can easily maintain a low temperature in the airflow.
Thermaltake AH T200 is a sturdy PC case, and it is also available in pink, which makes it a good addition to the series. Thermaltake AH T200 is an open PC case, which means it is very different from your normal PC case. As you can see, there are many openings in this case. There are tempered glass brackets on both sides and a large opening on the back above the expansion slot. However, this version of the case is a mini case, which means you can only use it to build a PC with mATX or ITX motherboard.
Needless to say, using a PC case with such a unique design may be much more difficult than your ordinary case. You have many detachable parts to use. Although it is relatively easy to disassemble and reassemble it after construction, we still think this is very complicated for many users. That being said, there is enough space inside the case to install all the high-quality components built by a high-quality PC. The top panel has ventilation holes. There is no shortage of airflow in this case, but if you need more airflow, it is there.
You can install two 120mm or 140mm fans on the top and two 120mm or 140mm fans on the front. The PC case itself does not have any fans pre-installed, so you must purchase them separately. As for the radiator mounting bracket, it can only be installed on the front, because there is no installation space on the top or back of the case. You can install a 240mm or 280mm radiator on the front. Thermaltake stated that you can install a GPU with a maximum length of 320 mm and a CPU cooler with a maximum height of 150 mm. The power supply can be installed at the bottom, and there is a space for the power supply with a maximum length of 180mm.
Thermaltake AH T200 is very popular in the community due to its unique appearance. You don't see this PC case being used a lot, mainly because it is very difficult to build inside. That being said, if you are looking for something truly unique, it will not be better than the pink Thermaltake AH T200 PC case. You can also buy a larger version in this case, but it will cost more. However, larger situations will allow you to use larger components. You will be able to install larger motherboards and expand your capabilities.
Thermaltake AH T200 is also available in black and white, but we have added a pink version to this series, mainly because it is very different from other cases. It is worth pointing out that using an open PC case has its own series of problems. The most important one is dust collection on internal components. You must ensure that your PC is constantly cleaned.
InWin A1 Plus is an excellent miniITX tower machine, very suitable for those who want to build a small PC. It is also available in pink, making it an excellent addition to the series. InWin A1 Plus is a high-quality miniITX protective case with many outstanding features. There is a transparent tempered glass side panel on one side, while the remaining panels are solid panels made of metal. You can indeed get cutouts for vents on the sides and back, so the lack of vents on the front shouldn't be a problem.
InWin A1 Plus may be the most expensive case in the series, but that is because it also has a built-in power supply unit. In addition, there are two Sirius Loop ASL120 fans, which are also pre-installed in the case. One of the fans is installed on the side and the other is installed on the rear panel. There is not much working space, but it is almost the same for all miniITX PC cases. In this case, the radiator mounting options are also very limited, so we don't necessarily recommend it for high-end builds. You can install a 120mm radiator on the side panel or on the back, but that's it.
The pre-installed 650W PSU device is an 80 Plus gold-level device. A 650W PSU should be sufficient, especially for the kind of PC you will build in a small chassis like this one. The advantage of the pre-installed PSU is that the cable is ready to use out of the box, so you don't need to worry too much when building your PC. You can also get two GPU connectors (PCI-E 6 + 2 pins) for high-end graphics cards. This special case supports a CPU cooler with a maximum height of 160 mm and a GPU with a maximum length of 320 mm. This is comparable to many other cases mentioned in this list, so there are no complaints.
There are only two expansion slots on the chassis, so you may encounter some trouble when trying to install some of the newer awkward GPUs on the market. You will also notice that there is a translucent bracket at the bottom, and the case is on top. This facilitates the airflow at the bottom of the chassis. One interesting thing to note about this particular PC case is the addition of a wireless charger at the top. It is a WPC Qi 1.2 certified charger that can charge your mobile phone or other wireless devices with a maximum power of 10W.
In general, we think InWin A1 Plus is a sturdy miniITX case worth buying. Most of the questions we mentioned about this particular case are common in almost all miniITX PC cases, so there are new questions. Using SFF to build is more complicated than normal builds, so we only recommend this to enthusiast users. You can click on the link below to view the best price for this case.
If you prefer to build with mini-ITX PC, SilverStone SG13P is another good choice worth considering. There are also many different colors to choose from for this special case, including pink. Unlike the InWin A1 Plus PC case, the SilverStone SG12P comes with two front panel options. You can choose mesh panels for better airflow, or solid panels for minimal appearance. We recommend choosing a mesh front panel to increase the overall airflow of the chassis. Maintaining good airflow in the SFF case will help you get the best performance from the machine. The sturdy front panel is only suitable for those who want to build a relatively weak PC and want low-noise operation.
Either way, we believe that the SilverStone SG13P shell will not go wrong. Except for the mesh panel on the front, there are plenty of vents on all sides. No matter which front panel you choose to match, you can keep your case with good airflow. As a mini ITX PC case, you will work in the limited space inside the case. You can only install the ITX motherboard in the case, so be sure to select other components accordingly.
SilverStone SG13P only allows you to install a 120mm or 140mm fan on the front. You can also try to squeeze in another fan, but space is limited. In terms of radiator installation options, the options are also quite limited. You can only install a 120mm or 240mm radiator on the front panel. However, there is space inside the chassis to add 2.5-inch and 3.5-inch drives. Since there is no PSU unit like InWin A1 Plus in this case, we recommend choosing an SFX PSU for your build. The SFX PSU should fit into the chassis without problems. It is worth noting that you can also install a CPU cooler with a maximum height of 82 mm. This is a bit less than other cases, but it is commonplace for most SFF situations. SilverStone did not mention the GPU gap, but we expect that this case will be compatible with all available GPUs on the market, except for the larger 3090.
In general, we think SilverStone SG13P seems to be a very good case. However, due to limited space, we do not recommend this particular variant for high-end builds. You may not be able to install a suitable cooling solution for high-performance builds, so keep this in mind. Having said that, using SilverStone SG13P is really worth the money. For only $57, this is one of the most affordable cases we have added to this series. If you want a high-quality mini-ITX pink case, you can upgrade to InWin A1 Plus. If you don’t plan to buy a pink case, there are many other options. You can find the best price in this case by clicking the link below.
If you like to display RGB lighting effects in a PC case, then you may want to consider purchasing an Apevia Genesis G-PRO-PK case. Yes, a very strange name, but the case looks absolutely gorgeous. It is also available in pink, making it a perfect addition to the series. In this special case, tempered glass is installed on the front and one of the side panels. Tempered glass allows you to see the internal structure of the case from the side and the RGB fan from the front.
What we really like about this PC case is the addition of six fans. Yes, this particular case comes with six pre-installed RGB fans, enough to maintain heat output. All these RGB fans can be easily controlled together by connecting them to the controller or directly to the motherboard. The Apevia Genesis case looks very similar to the Corsair 4000D in many respects, although the price difference is large.
Compared to the installed fans, you don't have room for more fans, but you can install a heat sink for the cooler. There is room to install a 360 mm or 240 mm radiator on the front or a 240 mm radiator on the top panel. You can use ATX, M-ATX or ITX motherboards in this case, and you will have enough space for the heat sink anyway. The top panel with ventilation holes also has a mesh filter to prevent dust from entering the interior. There is a separate compartment at the bottom for the PSU and drive. You can install more drives by installing them in a dedicated location behind the motherboard tray.
As for the GPU gap, the Apevia Genesis case can accommodate cards with a maximum length of 350 mm. You can also install a CPU cooler with a maximum height of 160 mm. Like all other cases in this series, you can get seven GPU expansion slots, but there is no vertical GPU installation option. The front IO includes a USB 3.0 port, a USB 2.0 port, an audio jack and a power button. There is enough space inside the case for use, and the panel is easy to remove.
Overall, we think Apevia Genesis G-PRO-PK is an excellent PC case worth considering. This mid-tower case is very suitable for mid-range and even high-end PCs. We like that mature builds are not lacking in functionality. If you don't want the tempered glass front panel, you can also check the Vetroo A03 PC case we mentioned earlier. This special case has a mesh front panel to provide better airflow. In this case, the RGB lights also look subtle. You can't go wrong with any cabinet, and they are a good choice for people who want to buy a pink PC case. You can click on the link to find the best price for this device on Amazon.
As you can see, there are some nice and reliable pink PC cases on the market. In fact, almost all of the cases we mentioned in this series are excellent value for money. We think that the Vetroo A03 is a great choice for most people who want to build a decent mid-to-high-end PC. It is equipped with a mesh front panel to provide maximum airflow. If you want a toughened glass front panel, you can also consider the Apevia Genesis Pro chassis. Thermaltake AH T200 is also an excellent choice for high-performance PC, but it is a bit difficult to use.
We would love to know your thoughts on this series in the comments below. If we missed your favorite pink PC case, please let us know. If you are planning to build a new PC now, you might want to check out our best CPU or even the best motherboard series to start using some good choices. Also, don't forget to check out our XDA Computing Forum, where you can discuss your build, get product recommendations, etc.
XDA »Buying Guide» These are the best pink PC cases you can buy in 2021
Karthik introduced the PC hardware used for XDA calculations. When not working, you will find him yelling at the monitor while playing video games.
Receive the latest Android and development news in your inbox!
XDA Developers was founded by developers, for developers. It is now a valuable resource for people who want to make the most of their mobile devices (from customizing the appearance to adding new features).
Are you a developer? | Terms of Service
This website is protected by reCAPTCHA, and the Google privacy policy and terms of service apply.